Fly · Build · Explore
How it works
01 · Fly
We fly the site, or start from your footage.
A drone orbit of the homes, the lots and the streets around them. For a corridor, one pass along the line. If the flight records GPS, the model gets real-world scale.
02 · Build
Our AI builds one continuous photoreal model.
The imagery becomes a single model you move through freely, not photographs you hop between. Where GPS exists we anchor scale; on the corridor capture the fit was within 0.04% of true. We then prepare the measurements and layers each project asks for.
03 · Explore
You share one link.
The model opens on any device from a link on your domain: orbit it, walk it where walk mode is prepared, switch layers on and off, and open it full screen.
04 · What you receive
Delivered with the model
Real Estate
- One link on your domain, on any device
- Walk mode at ground level, with collision
- Measurements prepared on GPS-anchored captures, delivered as figures
- Highlighted areas delivered as switchable layers
- Frames rendered from one continuous model for listings and print
Power Line Scan
- Photoreal scene of the corridor, shared by link
- Classified view and fitted conductors as switchable layers
- Clearance screening report against your threshold
- Before and after scene pairs when the corridor is flown twice
05 · Starting from existing footage
Already flown the site? Send us the footage and we start from there.
- Continuous video from a drone orbit, including 360° video
- A flight log or frames with GPS, which gives the model real-world scale
- Coverage of every side of what matters: a home from all angles, a corridor from end to end
Without GPS the model is image-only: good for exploring, with no metric figures quoted from it.
Tell us about the site.
We reply to plan the flight, or to start from the footage you already have.